Part Number Hot Search : 
CY7C195B BYT54A SBC5461 TCR2BE12 BYT56G UF4004 BZX84C16 OP123
Product Description
Full Text Search
 

To Download AD8692 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Low Cost, High Performance, CMOS Rail-to-Rail Output Operational Amplifier AD8692
FEATURES
Offset voltage: 400 V typ Low offset voltage drift: 6 V/C maximum Very low input bias currents: 1 pA maximum Low noise: 8 nV/Hz Low distortion: 0.0006% Wide bandwidth: 10 MHz Unity gain stable Single-supply operation: 2.7 V to 6 V
PIN CONFIGURATIONS
OUT A 1 -IN A 2 +IN A 3 V- 4
8
AD8692
TOP VIEW (Not to Scale)
V+ OUT B +IN B
04991-001
04991-002
7 6 5
-IN B
Figure 1. 8-Lead MSOP Pin Configuration
OUT A 1
8
V+ OUT B
APPLICATIONS
Photodiode amplification Battery-powered instrumentation Medical instruments Multipole filters Sensors Portable audio devices
-IN A 2 +IN A 3
AD8692
7
6 -IN B TOP VIEW V- 4 (Not to Scale) 5 +IN B
Figure 2. 8-Lead SOIC Pin Configuration
GENERAL DESCRIPTION
The AD8692 is a low cost, dual rail-to-rail output, single-supply amplifier featuring low offset voltage, low input voltage and current noise, and wide signal bandwidth. The combination of low offset, low noise, very low input bias currents, and high speed makes this amplifier useful in a wide variety of applications. Filters, integrators, photodiode amplifiers, and high impedance sensors all benefit from the combination of performance features. Audio and other ac applications benefit from the wide bandwidth and low distortion. Applications for this amplifier include PA controls, laser diode control loops, portable and loop-powered instrumentation, audio amplification for portable devices, and ASIC input and output amplifiers. The AD8692 is specified over the extended industrial temperature range of -40C to +125C. The AD8692 is available in the micro-SOIC and 8-lead narrow SOIC surface-mount packages.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.326.8703 (c) 2004 Analog Devices, Inc. All rights reserved.
AD8692 TABLE OF CONTENTS
Electrical Characteristics ................................................................. 3 Absolute Maximum Ratings............................................................ 5 Thermal Characteristics .............................................................. 5 ESD Caution.................................................................................. 5 Typical Performance Characteristics ..............................................6 Outline Dimensions ....................................................................... 11 Ordering Guide .......................................................................... 11
REVISION HISTORY
10/04--Revision 0: Initial Version
Rev. 0 | Page 2 of 12
AD8692 ELECTRICAL CHARACTERISTICS
VS = 2.7 V, VCM = VS/2, TA = 25C, unless otherwise noted. Table 1.
Parameter INPUT CHARACTERISTICS Offset Voltage Input Bias Current Symbol VOS IB -40C < TA < +85C -40C < TA < +125C Input Offset Current IOS -40C < TA < +85C -40C < TA < +125C Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Offset Voltage Drift OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Low Short-Circuit Current Closed-Loop Output Impedance POWER SUPPLY Power-Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Settling Time Gain Bandwidth Product Phase Margin Total Harmonic Distortion + Noise NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density CMRR AVO VOS/T VOH VOL ISC ZOUT PSRR ISY VCM = -0.3 V to +1.6 V VCM = -0.1 V to +1.6 V; -40C < TA < +125C RL = 2 k, VO = 0.5 V to 2.2 V -0.3 70 65 90 90 85 250 1.3 2.66 25 20 12 80 75 95 95 0.85 40 50 0.1 Conditions VCM = -0.3 V to +1.6 V VCM = -0.1 V to +1.6 V; -40C < TA < +125C Min Typ 0.4 0.2 Max 2.0 3.0 1 50 260 0.5 20 75 +1.6 Unit mV mV pA pA pA pA pA pA V dB dB V/mV V/C V V mV mV mA dB dB mA mA V/s s MHz Degrees % 3.0 12 V p-p nV/Hz nV/Hz pA/Hz
6.0
IL = 1 mA -40C < TA < +125C IL = 1 mA -40C < TA < +125C f = 1 MHz, AV = 1 VS = 2.7 V to 5.5 V -40C < TA < +125C VO = 0 V -40C < TA < +125C RL = 2 k To 0.01%
2.64 2.6
0.95 1.2
SR tS GBP Oo THD+N en p-p en en in
G = 1, RL = 600 , f = 1 kHz, VO = 250 mV p-p f = 0.1 Hz to 10 Hz f = 1 kHz f = 10 kHz f = 1 kHz
5 1 10 60 0.003 1.6 8 6.5 0.05
Rev. 0 | Page 3 of 12
AD8692
VS = 5.0 V, VCM = VS/2, TA = 5C, unless otherwise noted. Table 2.
Parameter INPUT CHARACTERISTICS Offset Voltage Input Bias Current Symbol VOS IB -40C < TA < +85C -40C < TA < +125C Input Offset Current IOS -40C < TA < +85C -40C < TA < +125C Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Offset Voltage Drift OUTPUT CHARACTERISTICS Output Voltage High CMRR AVO VOS/T VOH VCM = -0.3 V to +3.9 V VCM = -0.1 V to +3.9 V; -40C < TA < +125C VO = 0.5 V to 4.5 V, RL = 2 k, VCM = 0 V -0.3 75 70 250 95 95 2,000 1.3 4.98 4.78 16.5 165 80 10 80 75 95 95 0.95 40 210 290 0.1 Conditions VCM = -0.3 V to +3.9 V VCM = -0.1 V to +3.9 V; -40C < TA < +125C Min A Grade Typ 0.4 0.2 Max 2.0 3.0 1 50 260 0.5 20 75 +3.9 Unit mV mV pA pA pA pA pA pA V dB dB V/mV V/C V V V mV mV mV mA dB dB mA mA V/s s kHz MHz Degrees % 3.0 12 V p-p nV/Hz nV/Hz pA/Hz
6
Voltage Low
VOL
IL = 1 mA IL = 10 mA -40C to +125C IL = 1 mA IL = 10 mA -40C to +125C f = 1 MHz, AV = 1 VS = 2.7 V to 5.5 V -40C < TA < +125C VO = 0 V -40C < TA < +125C RL = 2 k To 0.01% <1% distortion
4.96 4.7 4.6
Short-Circuit Current Closed-Loop Output Impedance POWER SUPPLY Power-Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Settling Time Full Power Bandwidth Gain Bandwidth Product Phase Margin Total Harmonic Distortion + Noise NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density
ISC ZOUT PSRR ISY
1.05 1.3
SR tS BWP GBP Oo THD+N en p-p en en in
G = 1, RL = 600 , f = 1 kHz, VO = 1 V p-p f = 0.1 Hz to 10 Hz f = 1 kHz f = 10 kHz f = 1 kHz
5 1 360 10 65 0.0006 1.6 8 6.5 0.05
Rev. 0 | Page 4 of 12
AD8692 ABSOLUTE MAXIMUM RATINGS
TA = 25C, unless otherwise noted. Table 3.
Parameters Supply Voltage Input Voltage Differential Input Voltage Output Short-Circuit Duration to Gnd1 Storage Temperature Range Operating Temperature Range Junction Temperature Range Lead Temperature Range (Soldering, 60 s) Ratings 6V VSS - 0.3 V to VDD + 0.3 V 6 V Observe derating curves -65C to +150C -40C to +125C -65C to +150C 300C
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
THERMAL CHARACTERISTICS
Table 4.
Package Type 8-Lead MSOP (RM) 8-Lead SOIC (R) JA 210 158 JC 45 43 Unit C/W C/W
1
JA is specified for the worst-case conditions, that is, the device soldered in the circuit board for surface-mount packages.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. 0 | Page 5 of 12
AD8692 TYPICAL PERFORMANCE CHARACTERISTICS
VS = +5 V or 2.5 V.
2.5k VS = 5V VCM = -0.3V TO +3.9V 2.0k
NUMBER OF AMPLIFIERS
300 VS = 5V AND 2.7V 250 200
1.5k
IB (pA)
150 100 50
1.0k
500
0
04991-003
-40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90 100 110 120
VOS (mV)
TEMPERATURE (C)
Figure 3. Input Offset Voltage Distribution
30 VS = 5V AND 2.7V VCM = 2.5V TA = -40C TO +125C
2.0 1.8 1.6 1.4 ISY (mA) 1.2 1.0 0.8 0.6 0.4 0.2
04991-004
Figure 6. Input Bias Current vs. Temperature
25
NUMBER OF AMPLIFIERS
20
15
10
5
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
0
1
2
3 VSY (V)
4
5
6
7
TCVOS (V/C)
Figure 4. Input Offset Voltage Drift Distribution
2.0k 1.6k VS = 5V TA = 25C
Figure 7. Supply Current vs. Supply Voltage
2.5 VS = 2.5V AND 1.35V 2.0 ISY @ 2.5V
INPUT OFFSET VOLTAGE (V)
1.2k
SUPPLY CURRENT (mA)
800 400 0 -400 -800 -1.2k -1.6k
04991-005
ISY @ 1.35V 1.5
1.0
0.5
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 3.6 3.9 COMMON-MODE VOLTAGE (V)
-20
0
20
40
60
80
100
120
140
TEMPERATURE (C)
Figure 5. Input Offset Voltage vs. Common-Mode Voltage
Figure 8. Supply Current vs. Temperature
Rev. 0 | Page 6 of 12
04991-008
-2.0k -0.3 0
0 -40
04991-007
0
0
04991-006
0 -2.0
-1.5
-1.0
-0.5
0
0.5
1.0
1.5
2.0
-50
AD8692
10k
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
100 80
VSY = 2.5V, 1.35V RL = 2k CL = 15pF
1k
OPEN-LOOP GAIN (dB)
SOURCE 100 SINK
60 40 20 0 -20 90 45 0 -45 -90
PHASE (Degrees)
04991-014 04991-013
04991-012
10
1
04991-009
0.1 0.001
-40
0.01
0.1
1
10
100
1k
10k
100k
1M
10M
LOAD CURRENT (mA)
FREQUENCY (Hz)
Figure 9. Output Voltage to Supply Rail vs. Load Current
Figure 12. Open-Loop Gain and Phase vs. Frequency
35 VS = 5V 30
OUTPUT VOLTAGE SWING (mV)
120 VS = 5V AND 2.7V 100
VDD - VOH @ 1mA
25
80
20 VOL @ 1mA 15 10 5 0 -40
CMRR (dB)
04991-010
60
40
20
-20
0
20
40
60
80
100
120
140
0
1k
10k
100k FREQUENCY (Hz)
1M
10M
TEMPERATURE (C)
Figure 10. Output Voltage Swing vs. Temperature (IL = 1 mA)
350 VS = 5V 300
OUTPUT VOLTAGE SWING (mV)
Figure 13. CMRR vs. Frequency
120 VS = 5V AND 2.7V
VDD - VOH @ 10mA
100
250
80
200 150 100 50 0 -40 VOL @ 10mA
PSRR (dB)
04991-011
60
40
20
-20
0
20
40
60
80
100
120
140
0 10
100
1k
10k
100k
1M
10M
TEMPERATURE (C)
FREQUENCY (Hz)
Figure 11. Output Voltage Swing vs. Temperature (IL = 10 mA)
Figure 14. PSRR vs. Frequency
Rev. 0 | Page 7 of 12
AD8692
10k 1k 100
IMPEDANCE ()
VS = 2.5V
AV = 100 AV = 10 AV = 1
VOLTAGE (1V/DIV)
VS = 5V CL = 200pF RL = AV = 1
10 1 0.1 0.01 0.001
04991-015
1k
10k
100k
1M
10M
FREQUENCY (Hz)
TIME (400nV/DIV)
Figure 15. Closed-Loop Output Impedance vs. Frequency
Figure 18. Large Signal Transient Response
40 35 30 VS = 5V AND 2.7V RL = AV = 1
VS = 2.5V AV = -50
OVERSHOOT (%)
25 20 15 10 5 0
VOUT (V)
0
-2.5 100
VIN (mV)
0
04991-016
1
10
100
1k
LOAD CAPACITANCE (pF)
TIME (400ns/DIV)
Figure 16. Small Signal Overshoot vs. Load Capacitance
Figure 19. Positive Overload Recovery
VOLTAGE (50mV/DIV)
VOUT (V)
VS = 2.5V, 1.35V RL = 10k CL = 200pF AV = 1
VS = 2.5V AV = -50 2.5
0
0
VIN (mV)
-100
04991-017
TIME (200ns/DIV)
TIME (400ns/DIV)
Figure 17. Small Signal Transient Response
Figure 20. Negative Overload Recovery
Rev. 0 | Page 8 of 12
04991-020
04991-019
04991-018
0.0001 100
AD8692
0.1 VS = 2.5V AV = 1 VIN = 1V p-p BW = 20kHz
1k
VS = 2.5V AND 1.35V
RL = 600 RL = 1k
NOISE (nV/ Hz)
0.01
100
THD + N (%)
0.001
10
RL = 100k
04991-021
100
1k FREQUENCY (Hz)
10k
20k
1
10
100 FREQUENCY (Hz)
1k
10k
Figure 21. THD + N vs. Frequency
Figure 23. Voltage Noise Density
150
VS = 5V AND 2.7V
+2.5V V+ VIN 28mV p-p A V- -2.5V VOUT
R1 10k V- B V+
140
CHANNEL SEPARATION (dB)
R2 100
VOLTAGE NOISE (1V/DIV)
130 120 110 100 90 80
04991-022
1k
10k
100k FREQUENCY (Hz)
1M
10M
TIME (1s/DIV)
Figure 22. 0.1 Hz to 10 Hz Input Voltage Noise
Figure 24. Channel Separation
Rev. 0 | Page 9 of 12
04991-024
04991-023
0.0001 20
1
AD8692
VS = +2.7 V or 1.35 V.
1.2k VS = 2.7V VCM = -0.3V TO +1.6V 1.0k
OUTPUT VOLTAGE SWING (mV) NUMBER OF AMPLIFIERS
60
VS = 2.7V
50 VDD - VOH @ 1mA 40
800
600
30 VOL @ 1mA 20
400
200
10
-20
0
20
40
60
80
100
120
140
VOS (mV)
TEMPERATURE (C)
Figure 25. Input Offset Voltage Distribution
Figure 28. Output Voltage Swing vs. Temperature
2.0k 1.6k VS = 2.7V TA = 25C
INPUT OFFSET VOLTAGE (V)
1.2k 800 400
0
VS = 2.7V CL = 200pF RL = AV = 1
-400 -800 -1.2k -1.6k 0 0.3 0.6 0.9 1.2 1.5 1.6
04991-026
COMMON-MODE VOLTAGE (V)
TIME (400ns/DIV)
Figure 26. Input Offset Voltage vs. Common-Mode Voltage
10k
OUTPUT VOLTAGE TO SUPPLY RAIL (mV)
Figure 29. Large Signal Transient Response
VS = 2.7V 1k
100
SOURCE SINK
10
1
0.01
0.1
1
10
100
LOAD CURRENT (mA)
Figure 27. Output Voltage to Supply Rail vs. Load Current
Rev. 0 | Page 10 of 12
04991-027
0.1 0.001
04991-029
-2.0k -0.3
VOLTAGE (500mV/DIV)
04991-028
-1.5
-1.0
-0.5
0
0.5
1.0
1.5
2.0
04991-025
0 -2.0
0 -40
AD8692 OUTLINE DIMENSIONS
3.00 BSC
8 5
3.00 BSC
4
4.90 BSC
PIN 1 0.65 BSC 0.15 0.00 0.38 0.22 COPLANARITY 0.10 1.10 MAX 8 0 0.80 0.60 0.40
0.23 0.08 SEATING PLANE
COMPLIANT TO JEDEC STANDARDS MO-187AA
Figure 30. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters
5.00 (0.1968) 4.80 (0.1890)
8 5 4
4.00 (0.1574) 3.80 (0.1497) 1
6.20 (0.2440) 5.80 (0.2284)
1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040)
1.75 (0.0688) 1.35 (0.0532)
0.50 (0.0196) x 45 0.25 (0.0099)
0.51 (0.0201) COPLANARITY SEATING 0.31 (0.0122) 0.10 PLANE
8 0.25 (0.0098) 0 1.27 (0.0500) 0.40 (0.0157) 0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MS-012AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 31. 8-Lead Standard Small Outline Package [SOIC] (R-8) Dimensions shown in millimeters and (inches)
ORDERING GUIDE
Model AD8692ARMZ-R21 AD8692ARMZ-REEL1 AD8692ARZ1 AD8692ARZ-REEL1 AD8692ARZ-REEL71 Temperature Range -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 8-Lead MSOP 8-Lead MSOP 8-Lead SOIC 8-Lead SOIC 8-Lead SOIC Package Option RM-8 RM-8 R-8 R-8 R-8 Branding APA APA
1
Z = Pb-free part.
Rev. 0 | Page 11 of 12
AD8692 NOTES
(c) 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D04991-0-10/04(0)
Rev. 0 | Page 12 of 12


▲Up To Search▲   

 
Price & Availability of AD8692

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X